A simple hand planer with 45 degree (which is rough, use it with soft materials) , pretty tight tolerance"0.1" clearance, using grease for the track and the screw is recommended, there is a 2mm hole (use filament piece or cut cloth hanger steal wire “27mm”) in the screw shaft to secure the knurled knob.
You need:
2 hex screw m3 x 6.
2 hex screw m3 x 10.
4 m3 nuts.
utility razor blade.
| blade_holder_v2.stl | 1.0MB | |
| cap_v2.stl | 143.2KB | |
| Main_body_v2.stl | 4.8MB | |
| screw_cap_v2.stl | 501.1KB | |
| screw_shaft_v2.stl | 1.5MB |
