Hand Crank Mixer 3D Printer Model
The file 'Hand Crank Mixer 3D Printer Model' is (stl) file type, size is 3.9MB.
The file 'Hand Crank Mixer 3D Printer Model' is (stl) file type, size is 3.9MB.
This is an old style hand mixer model I created to print out using my top down DLP printer. i plan to use the mixer to stir the resin in my vat (it holds approx. 13L)
The resin must be stirred occasionally to ensure proper distribution of the various components, otherwise print results may not be as desired.
I'd love to see what kind of results people get printing this on an FDM printer if they decide to try it, as I don't have one on which to try.
/edit I doubt it needs to be said, but just in case, you will need to print out 2 of the following parts to complete the model - Small Gear, Beater Shaft, Beater Cap, Beater End, and Top Handle End Cap. Other parts only need 1.
/edit I added a remix of some parts which might be easier to print using an FDM printer.
You can find the parts here: https://www.thingiverse.com/thing:2751080
Marked as WIP for the moment, as I may add more or change if people have trouble.
If you try to print it and have any issues, let me know and I'll see if I can fix it up for you :)
| Beater_cap.stl | 135.2KB | |
| Beater_End.stl | 3.9MB | |
| Beater_Shaft.stl | 203.5KB | |
| Big_Gear.stl | 528.8KB | |
| Crank_End_Cap.stl | 1017.6KB | |
| Crank_End_Cap_Holder.stl | 228.1KB | |
| Crank_Handle_Shaft.stl | 494.0KB | |
| Crank_Handle_Spinner.stl | 1.7MB | |
| Main_Body.stl | 2.4MB | |
| Small_Gear.stl | 156.7KB | |
| Top_Handle.stl | 217.1KB | |
| Top_Handle_End_Cap.stl | 646.1KB |
