11/20/2016
STILL NOT WORKING RIGHT, REDESIGN IN PROGRESS.
Hand powered air or water pump.
Designed to fill balloons with air.
Lid will pop onto body and seal. Flapper valve and balloon valve pop into lid. Balloons fit onto nozzle.
Please post your prints!
7/22/16 - Design flaw found, will fix shortly. (needs second flapper valve)
7/24/16 - REV B: Added internal valve to keep air in balloon during stoke.
4 items to print
Body - TPU/NINJA
Flapper - TPU/NINJA (NINJA recommended)
Balloon Flapper - TPU/NINJA (NINJA recommended)
Lid - PLA/ABS
Designed to be printed with a .2mm layer height.
| FLEXI_BALLOON_VALVE.STL | 104.9KB | |
| FLEXI_FLAPPER_VALVE.STL | 24.3KB | |
| FLEXI_PUMP.PDF | 121.2KB | |
| FLEXI_PUMP_LID_REV_B.STL | 632.7KB | |
| FLEXI_PUMP_REV_B.PDF | 78.3KB | |
| PUMP_BODY.STL | 66.1KB |
