https://www.youtube.com/watch?v=eky3g7WeSCQ
Read the Full Tutorial:
https://learn.adafruit.com/halo-energy-sword/overview
Shop for 3D Printing parts on: http://adafru.it/3dprinting
Build a NeoPixel LED powered Energy Sword with Bluetooth controls! Read the full build guide on: https://learn.adafruit.com/halo-energy-sword?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting
In this project we’re making a 3D Printed Energy Sword from the Halo video game series. Inside the blades are NeoPixel LEDs which are connected to an Adafruit Feather BLE 32u4 micro-controller.
A 2000mAh lipo battery will provide several hours of energy and can be recharged over USB.The blade is 86cm (34in) tall and the whole sword weighs just under 1 pound.
You can connect to the Adafruit Feather through Bluetooth. The Adafruit Bluefruit LE Connect app for iOS or Android lets you change the animation or color of the LEDs.
Archive.zip | 17.2MB | |
blade-tip-in.stl | 145.4KB | |
blade-tip.stl | 125.9KB | |
blade0.stl | 217.2KB | |
blade0in.stl | 237.7KB | |
blade1.stl | 261.5KB | |
blade1in.stl | 340.1KB | |
blade2.stl | 179.4KB | |
blade2in.stl | 210.9KB | |
handle-back-F3mm.gcode | 14.4MB | |
handle-back.stl | 16.4MB | |
handle-end.stl | 2.2MB | |
handle-front-F-um.gcode | 13.7MB | |
handle-front.stl | 17.8MB |