Halo 2 M6C Magnum (V3) 3D Printer Model
The file 'Halo 2 M6C Magnum (V3) 3D Printer Model' is (3mf,stl) file type, size is 8.0MB.
The file 'Halo 2 M6C Magnum (V3) 3D Printer Model' is (3mf,stl) file type, size is 8.0MB.
Further refined (final version) of the Halo 2 Magnum. I did away with the Mag release button and opted for a friction-fit for the magazine. I also fixed quite a few mesh issues and oriented the parts in the best way to print them. The files are roughlt at 75% scale of canon size. There is now a tab and holes on the inside of the slide to mount a spring using some short M3 screws and a few pieces of 1.5mm rods. Please LMK if you need any help and please post makes!!! Happy printing!
| assembly.3mf | 2.9MB | |
| barrel_1_-FIXED-.stl | 479.5KB | |
| barrel_2.stl | 647.4KB | |
| bullet_bottom_barrel_1_-FIXED-.stl | 420.9KB | |
| bullet_top_barrel_1_-FIXED-.stl | 434.3KB | |
| button_barrel_1_-FIXED-.stl | 187.8KB | |
| full.3mf | 1.9MB | |
| hammer.stl | 16.9KB | |
| handle.stl | 2.5MB | |
| hand_guard_barrel_1_-FIXED-.stl | 379.4KB | |
| Lower_front.stl | 701.1KB | |
| Lower_rear.stl | 560.5KB | |
| mag_bottom.stl | 356.2KB | |
| Mag_top_barrel_1_-FIXED-.stl | 468.2KB | |
| pins_barrel_1_-FIXED-.stl | 99.3KB | |
| Slide_barrel_1_-FIXED-.stl | 3.5MB | |
| slide_retainer.stl | 148.7KB | |
| trigger_barrel_1_-FIXED-.stl | 62.1KB |
