Halloween Pumpkin Spider More Easy Printing 3D Printer Model
The file 'Halloween Pumpkin Spider More Easy Printing 3D Printer Model' is (stl) file type, size is 2.5 MB.
The file 'Halloween Pumpkin Spider More Easy Printing 3D Printer Model' is (stl) file type, size is 2.5 MB.
This is the amazing Halloween Pumpkin Spider Transformer created by Megawillbot, but changed to my principle "The best support is the one you don't need".
Therefore I cut it in a way so you can print it easy nearly without supports! Use CA glue to join the splitted parts.
Note that the Chest_lower still needs support, but it will be easy to remove and the surface isn't visible in the final product.
Additional, I separated parts that need different colors, so you can get a nice result without painting it.
I also fixed an error in the Chest file, where there was a small gap between the sphere and it's post. Without that fix you might get a sparse layer just below the sphere which will likely break later.
| Chest_lower.stl |
| Chest_upper.stl |
| Eye_big.stl |
| Eye_small.stl |
| Hat_green.stl |
| Hat_orange.stl |
| Head_1.stl |
| Head_2.stl |
| leg_half.stl |
| neck.stl |
| slice_1.stl |
| slice_2.stl |
