Halloween Pumpkin RGB LED 3d-printed [email protected] Kürbis 3D Printer Model
The file 'Halloween Pumpkin RGB LED 3d-printed [email protected] Kürbis 3D Printer Model' is (stl) file type, size is 14.0MB.
The file 'Halloween Pumpkin RGB LED 3d-printed [email protected] Kürbis 3D Printer Model' is (stl) file type, size is 14.0MB.
A 3d-printed pumpkin with slow flashing RGB-LED 5MM and CR2032
Halloween pumpkin.
80MM diameter
60MM high
Ein 3d gedruckter Kürbis mit langsam blinkender 5MM RGB-LED und CR2032 Knopfzelle.
80MM Durchmesser
60MM hoch
5MM RGB LED slow flashing
http://www.ebay.de/itm/Rainbow-Slow-Flashing-Flash-Multi-Color-RGB-Red-Green-Blue-LED-10-Stuck-/162250441543?hash=item25c6e14347:g:X4EAAOSwl9BWIRVx
CR2032 coin cell
My 3d-print designs @thingiverse
https://www.thingiverse.com/3D_Print_Karlsruhe/designs
I'm designed a "02" Version.
There is the pumpkin without stem but with a hole at the top.
2 Versions of the stem with and without a hole for hanging.
And a Plug for the bottom.
At the back on the bottom remain a small hole to pull out the plug with a paper-clip.
You can follow me on twitter
https://twitter.com/3d_print_ka
shapeways
http://www.shapeways.com/designer/3d_print_ka
3dhubs
https://www.3dhubs.com/karlsruhe/hubs/prusa-i3-200x200x200
Myminifactory
https://www.myminifactory.com/de/users/3D-Print-KA
I'm from Stutensee (Karlsruhe, Germany)
| Kuerbis01X.stl | 5.1MB | |
| Kuerbis01X_hole.stl | 5.1MB | |
| Kuerbis01_01.stl | 5.0MB | |
| Kuerbis01_stem.stl | 183.8KB | |
| Kuerbis01_stem_hole.stl | 205.3KB | |
| Kuerbis02X.stl | 5.1MB | |
| Kuerbis02X_no_stem.stl | 5.0MB | |
| Kuerbis02X_plug.stl | 17.6KB | |
| Kuerbis02X_stem.stl | 198.5KB | |
| Kuerbis02X_stem_hole.stl | 220.1KB |
