This storage building is modelled after a building from the Speicherstadt Hamburg. In H0 scale it has a footprint of 257x111x150mm.
Parts to print:
Walls:
I printed the wall sections in an upright position so the brick texture is more detailed.
2x Dach A //roof section A
2x Dach gespiegelt B //mirrored version of roof section A
2x Giebel Dach A //wall section beneath the roof
2x Giebel gespieglet Dach B
1x kurz F vorne A //short front A
1x kurz F vorne B //short front B
1x lange F vorne A //long front A
1x lange F vorne B //long front B
1x Sp3E Inneneinrichtung unten //room for interior
Windows:
I printed all windows flat onto the build surface.
58x Sp3E Fenster 8,9mm //most windows are this one
4x Sp3E Treppenhaus Fenster klein
4x Sp3E Treppenhaus Fenster mittel
16x Sp3E Treppenhaus Fenster groß
12x Sp3E Fenster 8,9x10mm
4x Sp3E Fenster 8,9x15mm
8x Sp3E Bogenfenster 5mm
12x Sp3E Bogenfenster 16mm
4x Sp3E Fenster 3,5mm
2x Sp3E Tuer kurze S 14mm //bigger door for short side
4x Sp3E Tuer lange S 11mm //smaller door
The files for windows with 'Mauereinsatz' in their name can be used as a brick wall replacement for certain windows.
I hope I got the numbers right
| Dach_A.stl |
| Dach_gespiegelt_B.stl |
| Giebel_Dach_A.stl |
| Giebel_gespiegelt_Dach_B.stl |
| kurz_F_vorne_A.stl |
| kurz_F_vorne_B.stl |
| lange_F_vorne_A.stl |
| lange_F_vorne_B.stl |
| Sp3E_Bogenfenster_16mm.stl |
| Sp3E_Bogenfenster_5mm.stl |
| Sp3E_Fenster_35mm.stl |
| Sp3E_Fenster_89mm.stl |
| Sp3E_Fenster_89x10mm.stl |
| Sp3E_Fenster_89x15mm.stl |
| Sp3E_Inneneinrichtung_unten.stl |
| Sp3E_Mauereinsatz_89.stl |
| Sp3E_Mauereinsatz_89x10.stl |
| Sp3E_Treppenhaus_Fenster_groß.stl |
| Sp3E_Treppenhaus_Fenster_klein.stl |
| Sp3E_Treppenhaus_Fenster_mittel.stl |
| Sp3E_Tuer_kurze_S_14mm.stl |
| Sp3E_Tuer_lange_S_11mm.stl |
