H-Pins For Gravitrax Pro 3D Printer Model
The file 'H-Pins For Gravitrax Pro 3D Printer Model' is (stl) file type, size is 10.7KB.
The file 'H-Pins For Gravitrax Pro 3D Printer Model' is (stl) file type, size is 10.7KB.
At the request of the Masked Marble, I've put together a shorter connector for pinning together two adjacent Gravitrax Pro pillars. As shown in the photos that can be use don the top or bottom of the pillar.
There are two variations: one is 24mm long and the other is 25mm long.
At this size, dimensional accuracy with PLA can be fairly variable. I'm using Bambu filament and the 24mm version is consistently printing at 23.6mm, the 25mm is printing at about 24.5mm. Each piece is marked with 24 or 25.
I own a Bambu Lab A1 mini - you can find my print profile here -> https://makerworld.com/en/models/242923#profileId-259159
A short poirly filmed 'how-to' video is provided here :-)
https://youtu.be/FHAq_DI0biE?si=ktYQa8ud9px2ErfK
| GPro_Column_Pin_24mm_V1.stl | 24.5KB | |
| GPro_Column_Pin_25mm_V1.stl | 27.6KB |
