GyroFlake Ornament (’14) 3D Printer Model
The file 'GyroFlake Ornament (’14) 3D Printer Model' is (stl) file type, size is 972.5KB.
The file 'GyroFlake Ornament (’14) 3D Printer Model' is (stl) file type, size is 972.5KB.
Printing Notes:
Scale: 125%
Nozzle: .25mm
Layer Height: .15mm
Layer Width: .50mm
3 Perimiters
80% Infill
Black ABS @ 242 Deg C
30-50mm/s
I would highly suggest scaling by at least 2 if you have a .35mm nozzle or larger or if you need to increase your layer width to greater than .50mm at 125% Scale.
| 2014GyroFlake.stl | 3.3MB |
