These are a few gyro fidget spinners similar to: https://makerworld.com/en/models/245471?from=search#profileId-261872
but with six rings.
The 90° file has orthogonal pegs between adjacent rings.
The the 45°, 30°, and 22.5° versions have pegs offset by 45, 30, or 22.5 degrees between adjacent rings.
The spikes around the perimeter allow you to spin the whole toy in your hand.
The tolerances around the pegs are fairly tight, so printing at a slower speed is a good idea.
The tolerances aren't as tight around the version 2 models. They should work well with normal print settings.
| FidgetDisk22.5deg.stl | 2.4MB | |
| FidgetDisk22.5deg2.stl | 2.4MB | |
| FidgetDisk30deg.stl | 2.4MB | |
| FidgetDisk30deg2.stl | 2.4MB | |
| FidgetDisk45deg.stl | 2.4MB | |
| FidgetDisk45deg2.stl | 2.4MB | |
| FidgetDisk90deg.stl | 2.3MB | |
| FidgetDisk90deg2.stl | 2.4MB |
