IMPORTANT: Do not scale the object or it will be too thin and brake.
The gyro designs I saw on the internet were too heavy looking and used a lot of material, so I set out to make one that looked elegant and thin. It had it´s challenges, but after 5 prototypes and a lot of PLA, I arrived at Gyro Air. I don't like supports, so I made every form nice and round. The nipples that worked best are derived from the parametric gyro cube from smorloc
By popular demand I have uploaded a smaller version.
https://youtu.be/dMZzUBG6w0s
| Dalpek_Gyro_Air_Big_v6.stl | 24.3MB | |
| Dalpek_Gyro_Air_Small_v6.stl | 16.4MB |
