This is a Gwent Board 3D model split in 12 parts.
Width in Total: 60cm
Length in Total: 65cm
Max length of each part: 20*17cm
Currently optimized for 5mm magnets. Magnets of different thickness can be used with the 1mm thick magnet replacement.
Counter is designed for the tracking board from this post; https://www.thingiverse.com/thing:4981744
Original design by u/nemeras on Reddit, 3D model by me.
| counter.stl | 6.9KB | |
| Gwent_board_p1.stl | 178.2KB | |
| Gwent_Board_p10.stl | 204.1KB | |
| Gwent_Board_p11.stl | 129.7KB | |
| Gwent_Board_p12.stl | 178.2KB | |
| Gwent_Board_p2.stl | 129.7KB | |
| Gwent_Board_p3.stl | 204.1KB | |
| Gwent_Board_p4.stl | 201.4KB | |
| Gwent_Board_p5.stl | 131.5KB | |
| Gwent_Board_p6.stl | 224.5KB | |
| Gwent_Board_p7.stl | 224.5KB | |
| Gwent_Board_p8.stl | 131.5KB | |
| Gwent_Board_p9.stl | 201.4KB | |
| Gwent_Magnet_Replacement_.stl | 18.1KB |
