Gutter Attachment For EGO Leaf Blower 3D Printer Model
The file 'Gutter Attachment For EGO Leaf Blower 3D Printer Model' is (stl) file type, size is 228.8KB.
The file 'Gutter Attachment For EGO Leaf Blower 3D Printer Model' is (stl) file type, size is 228.8KB.
Designed a nozzle that fits on a EGO power LB7654 round nozzle with a narrowed end to squeeze into the space between the roof and the gutter outer edge to get at the stuff in a gutter to blast it free. Also added a tooth to it to break up the caked debris in the bottom of the gutter that won't blow out with just air. Just drag the tooth through the matted debris and it breaks up enough to blow out easily.
Should latch around end of the round nozzle then that nozzle will click onto the blower. I added some nubbins on the outside of the arms to allow putting a zip tie around the latch arms to more securely lock the fixture in place. It'd be a pain for it to fall off while you are on the roof.
This allows you to do the entire operation with one hand so you can manage your fall protection with the other.... You do use fall protection when you are the roof... right!?
| Blower_Gutter_Attachment_v4.stl | 627.3KB |
