Guts Dragonslayer V2 Full Size Cut Up 3D Printer Model
The file 'Guts Dragonslayer V2 Full Size Cut Up 3D Printer Model' is (stl) file type, size is 5.1MB.
The file 'Guts Dragonslayer V2 Full Size Cut Up 3D Printer Model' is (stl) file type, size is 5.1MB.
I remade the files for my Dragonslayer to be a little easier to print and put together.
Each piece should fit any printer that is about 250mmx210x200
I use the Prusa i3 MK2.5
There is no handle file since it wouldn't be able to support the weight of the blade. Instead there is a hole that goes through the entire blade which you should put a wooden dowl/PVC Pipe or anything like that though. (1 1/4 inch diameter)
I recommend using 5% infill and supports may be for part1
All other parts can be printed hollow.
Total print time for me was 60ish hrs and 1 and a quarter roll of filament.
Total blade length is 58 inches (1473.2mm)
| Part1.stl | 893.5KB | |
| part2.stl | 10.2MB | |
| part3.stl | 1.3MB | |
| part4.stl | 693.1KB | |
| part5.stl | 663.1KB | |
| part6.stl | 692.3KB | |
| part7.stl | 463.3KB | |
| part8.stl | 316.0KB | |
| part9.stl | 84.6KB | |
| pommel.stl | 129.4KB |
