Gundam Mecha Hangar 3D Printer Model
The file 'Gundam Mecha Hangar 3D Printer Model' is (stl) file type, size is 3.3MB.
The file 'Gundam Mecha Hangar 3D Printer Model' is (stl) file type, size is 3.3MB.
Firstly this is my FIRST 3d model i actually made myself its not perfect details might be a few mm off and there's going to be some post processing to make everything fit. But i really struggled finding any sorta of free hangar. i did recess caution marks on the ground for easy painting, crane and small bits have gears to lock them in certain angles to create more of a dynamic scene. oriented and split to ensure pegs print nice and the lights I used a 3mm, I truly hope some gunpla fans enjoy this. scaled off of the actual ones 150 mm x 150 mm base size.
Update added a 2nd floor design for a 2nd story adapters are used to connect the wall to the 2nd story floor, wide is only needed for partial floors The only difference in A and B are the orientation incase you want to have it a certain angle beside the original floor ( i highly recommend gluing or something the second floor)
| 2ndfloorAbottomholesonly.stl | 550.2KB | |
| 2ndfloorAHoles.stl | 561.0KB | |
| 2ndfloorA_noholes.stl | 430.1KB | |
| 2ndfloorB_bottomholes_only.stl | 552.3KB | |
| 2ndfloorB_Holes.stl | 575.3KB | |
| 2ndfloorB_noholes_nowallholes.stl | 393.8KB | |
| 2ndfloorB_no_holes.stl | 434.4KB | |
| 2ndfloor_support_strut.stl | 148.8KB | |
| adapter.stl | 25.7KB | |
| crane.stl | 443.8KB | |
| crates_.stl | 530.8KB | |
| floor_connector.stl | 3.8KB | |
| hangar_corner_1.stl | 676.0KB | |
| hangar_corner_2.stl | 717.3KB | |
| hangar_floor.stl | 3.2MB | |
| hangar_floor_no_holes.stl | 3.1MB | |
| hangar_wall_flat.stl | 754.2KB | |
| light.stl | 50.4KB | |
| L_adapter.stl | 50.9KB | |
| L_wide_adapter.stl | 48.9KB | |
| scaffolding.stl | 394.2KB | |
| scaffolding2.stl | 829.2KB | |
| wide_adapter.stl | 25.3KB |
