A holder that holds your phone on the neck of your guitar in a perfect 45 degree angle. I'm traveling to Israël next month with a group of about 45 people and we're going to make some music while where there. I needed something to be able to make a playlist and read some chords of a screen without having to take a stand with me so I created a universal guitar phone holder.

The pieces are seperate so you can use the base (part 1 & 2) and create your own attachments (for example a GoPro mount attachment or whatever). In my case I glued the mount piece onto part 1. Then I printed the phone holder, this one is 10mm thick and 75mm wide (it accomodates the iPhone X). You can create your own holder if you'd like. The hole diameter is 5mm and the outer radius of the mount is 16mm with a gap of 7mm between both parts.

Good luck, let me know if you print this :)

I print all parts at 100% infill in ABS (because of high temperatures and exposure to sun) except for the phone holder which I printed in a multilayer process: 35% infill but for the parts where the screw comes in I use 100% infill. I printed it on it's side so the phone holder has 2 "bars" of 100% infill if you will :)