Guitar Hero Warriors Of Rock Custom Wings V3 – Xplorer 3D Printer Model
The file 'Guitar Hero Warriors Of Rock Custom Wings V3 – Xplorer 3D Printer Model' is (zip,stl) file type, size is 1.2MB.
The file 'Guitar Hero Warriors Of Rock Custom Wings V3 – Xplorer 3D Printer Model' is (zip,stl) file type, size is 1.2MB.
UPDATED 7-2-24 @ 6:30pm
Slightly enlarged the Xplorer to feel more substatial
UPDATED 7-8-24 @ 7:45pm
Updated pegs for the Mini connectors for better fitment
These are Xplorer-styled wings for the Guitar Hero Warriors of Rock Guitar controller!
If you have a large enough printer to support it, use the "Whole" variant.
If you have a small printer, each of the "Mini" variants fit comfortably onto the bed of a Prusa Mini +, and are then attached together.
For a Big Printer, download:
GHWOR-Xplorer-L-Whole.stl
GHWOR-Xplorer-R-Whole.stl
For a small printer, download:
ALL-MINI-PARTS.zip
OR
GHWOR-Xplorer-L-Mini-Top.stl
GHWOR-Xplorer-L-Mini-Middle.stl
GHWOR-Xplorer-L-Mini-Bottom.stl
GHWOR-Xplorer-R-Mini-Top.stl
GHWOR-Xplorer-R-Mini-Middle.stl
GHWOR-Xplorer-R-Mini-Bottom.stl
and 8 of either:
GHWOR-Xplorer-Mini-Connector-YOU-NEED-8-OF-THESE.stl
OR
GHWOR-Xplorer-Mini-Connector-Exact-Fit-YOU-NEED-8-OF-THESE.stl
Note for mini users, the connectors SHOULD pressure-fit, but backing it up with an adhesive may give more reliable results!
| ALL-MINI-PARTS.zip | 370.0KB | |
| GHWoR-Mini-Connector-YOU-NEED-8-OF-THESE.stl | 3.8KB | |
| GHWOR-Xplorer-L-Mini-Bottom.stl | 33.4KB | |
| GHWOR-Xplorer-L-Mini-Middle.stl | 47.4KB | |
| GHWOR-Xplorer-L-Mini-Top.stl | 626.4KB | |
| GHWOR-Xplorer-L-Whole.stl | 713.5KB | |
| GHWOR-Xplorer-Mini-Connector-Exact-Fit-YOU-NEED-8-OF-THESE.stl | 3.8KB | |
| GHWOR-Xplorer-R-Mini-Bottom.stl | 45.7KB | |
| GHWOR-Xplorer-R-Mini-Middle.stl | 589.4KB | |
| GHWOR-Xplorer-R-Mini-Top.stl | 85.4KB | |
| GHWOR-Xplorer-R-Whole.stl | 719.5KB |
