Guitar Hero Warriors Of Rock Custom Wings V3 – PreWoRder 3D Printer Model
The file 'Guitar Hero Warriors Of Rock Custom Wings V3 – PreWoRder 3D Printer Model' is (stl,zip) file type, size is 1.1MB.
The file 'Guitar Hero Warriors Of Rock Custom Wings V3 – PreWoRder 3D Printer Model' is (stl,zip) file type, size is 1.1MB.
UPDATED 7-8-24 @ 7:45pm
Updated pegs for the Mini connectors for better fitment
These are based off the Pre-Order of the Guitar Hero Warriors of Rock Wings, the only other official design for the Warriors of Rock Guitar!
If you have a large enough printer to support it, use the "Whole" variant.
If you have a small printer, each of the "Mini" variants fit comfortably onto the bed of a Bambu Lab A1 Mini, and are then attached together.
For a Big Printer, download:
GHWOR-PreWoRder-L-Whole.stl
GHWOR-PreWoRder-R-Whole.stl
For a small printer, download:
PreWoRder-ALL-MINI-Pieces.zip
OR
GHWOR-PreWoRder-L-Mini-Top.stl
GHWOR-PreWoRder-L-Mini-Middle.stl
GHWOR-PreWoRder-L-Mini-Bottom.stl
GHWOR-PreWoRder-R-Mini-Top.stl
GHWOR-PreWoRder-R-Mini-Middle.stl
GHWOR-PreWoRder-R-Mini-Bottom.stl
and 8 of:
GHWOR-PreWoRder-Mini-Connector-YOU-NEED-8-OF-THESE.stl
Note for mini users, the connectors SHOULD pressure-fit, but backing it up with an adhesive may give more reliable results!
| GHWoR-Mini-Connector-YOU-NEED-8-OF-THESE.stl | 3.8KB | |
| GHWOR-PreWoRder-L-Mini-Bottom.stl | 29.8KB | |
| GHWOR-PreWoRder-L-Mini-Middle.stl | 639.0KB | |
| GHWOR-PreWoRder-L-Mini-Top.stl | 31.2KB | |
| GHWOR-PreWoRder-L-Whole.stl | 660.9KB | |
| GHWOR-PreWoRder-R-Mini-Bottom.stl | 31.8KB | |
| GHWOR-PreWoRder-R-Mini-Middle.stl | 640.8KB | |
| GHWOR-PreWoRder-R-Mini-Top.stl | 22.7KB | |
| GHWOR-PreWoRder-R-Whole.stl | 652.2KB | |
| PreWoRder-ALL-MINI-Pieces.zip | 379.5KB |
