Guitar Hero Warriors Of Rock Custom Wings V3 – Charisma 3D Printer Model
The file 'Guitar Hero Warriors Of Rock Custom Wings V3 – Charisma 3D Printer Model' is (zip,stl) file type, size is 1.2MB.
The file 'Guitar Hero Warriors Of Rock Custom Wings V3 – Charisma 3D Printer Model' is (zip,stl) file type, size is 1.2MB.
UPDATED 7-8-24 @ 7:45pm
Updated pegs for the Mini connectors for better fitment
This is based on the recently released PDP Riffmaster! Now you can get most of the experience without having to battle scalpers!
If you have a large enough printer to support it, use the "Whole" variant.
If you have a small printer, each of the "Mini" variants fit comfortably onto the bed of a Bambu Lab A1 Mini, and are then attached together.
For a Big Printer, download:
GHWOR-Charisma-L-Whole.stl
GHWOR-Charisma-R-Whole.stl
For a small printer, download:
Charisma-ALL-MINI-Pieces.zip
OR
GHWOR-Charisma-L-Mini-Top.stl
GHWOR-Charisma-L-Mini-Middle.stl
GHWOR-Charisma-L-Mini-Bottom.stl
GHWOR-Charisma-R-Mini-Top.stl
GHWOR-Charisma-R-Mini-Middle.stl
GHWOR-Charisma-R-Mini-Bottom.stl
and 8 of:
GHWOR-Charisma-Mini-Connector-YOU-NEED-8-OF-THESE.stl
Note for mini users, the connectors SHOULD pressure-fit, but backing it up with an adhesive may give more reliable results!
| Charisma-ALL-MINI-PIECES.zip | 397.1KB | |
| GHWOR-Charisma-L-Mini-Bottom.stl | 42.1KB | |
| GHWOR-Charisma-L-Mini-Middle.stl | 48.1KB | |
| GHWOR-Charisma-L-Mini-Top.stl | 643.2KB | |
| GHWOR-Charisma-L-Whole.stl | 751.5KB | |
| GHWOR-Charisma-R-Mini-Bottom.stl | 51.5KB | |
| GHWOR-Charisma-R-Mini-Middle.stl | 461.9KB | |
| GHWOR-Charisma-R-Mini-Top.stl | 234.9KB | |
| GHWOR-Charisma-R-Whole.stl | 750.2KB | |
| GHWoR-Mini-Connector-YOU-NEED-8-OF-THESE.stl | 3.8KB |
