Guardians Of The Galaxy Plant Pot 3D Printer Model
The file 'Guardians Of The Galaxy Plant Pot 3D Printer Model' is (stl) file type, size is 4.3MB.
The file 'Guardians Of The Galaxy Plant Pot 3D Printer Model' is (stl) file type, size is 4.3MB.
Guardians of the Galaxy Plant Pot is a plant pot based on the Guardians of the Galaxy Infinity Orb from @tonyyoungblood (http://www.thingiverse.com/thing:430184). Alternatively it can also serve as a container, for which there is a matching lid/cap. The cap was originally published by @Prot0typ1cal as Viking Brooch (http://www.thingiverse.com/thing:1440267). But it fits nicely.
The outer shell I have printed with two different woods (brown and green). The inner part with PLA.
Update:
14.06.2016: A new improved pot added "Guardians_Interior_Pot_NEW.stl".
29.05.2016: A finished ring for the inner pot added.
Good to know:
a) The bottom of the inside part (Guardians_Interior_Pot) was not completely waterproof, so I glued on the ground a plastic foil on it. Maybe it helps to print the bottom with 5 or more layers. The walls are with five layers waterproof.
b) Instead of the inner ring, you can also set the lid/cap on the inner pot.
------------------------
If you have no 3D-printer, you can buy a printed copy here:
www.shapeways.com/product/SQK7YV2U3/
------------------------
| GuardiansGalaxyInfinityOrbExteriorNEW.stl | 2.4MB | |
| GuardiansGalaxyInfinityOrbRim.stl | 1.5MB | |
| Guardians_Interior_Pot.stl | 108.3KB | |
| Guardians_Interior_Pot_Cap.stl | 6.0MB | |
| Guardians_Interior_Pot_NEW.stl | 64.3KB | |
| Guardians_Interior_Ring_NEW.stl | 6.9MB |
