The box is relatively small at 75 X 150 X 62 mm and can hold things like USB sticks and SD cards (or tiny glow sticks).
The hinges take two M2 X 20mm nuts and bolts to keep them together.
I've separated the model into several pieces for prints with flat bottoms no need for supports. The logos and the text are very small though so I recommend using some glue stick for these pieces (The text "industries" on the side won't even print at this size but it's there in case someone decides to make a bigger box).
If you liked this, consider fueling my cravings for coffee ☕
| GTFO-box-logos.stl | 601.1KB | |
| GTFO_box-grey.stl | 354.8KB | |
| GTFO_box-orange.stl | 89.6KB | |
| GTFO_resource-box.step | 1.7MB |
