The file 'GT86 BRZ FR-S Pioneer SPH-DA360DAB Head Unit Radio Bracket And Fascia 3D Printer Model' is (stl,ai) file type, size is 1.4MB.
This print consists of 3 parts:
This differs from the original by having additional supports on the mounting points, having been adjust such that the holes align with the SPH-DA360DAB holes, and such that the Fascia is a separate print that also fills top/bottom.
Adjsut Fascia
You can adjust Fascia by creating an SVG based on my SVG or illustrator file and changing the inner width/length/corner curvature to match your radio. Simply convert SVG to STL by opening in tinkercad and making it 5mm in height.
Adjust mounting brackets
You can create an SVG like mine (svg or illustrator file) to have right height of radio and multiple mounting holes measured from front of radio. This SVG can then be loaded into tinkercad to replace mounting holes in my design. You may first want to remove the old "hole layer".
Bracket_GT86_left.stl | 104.7KB | |
Bracket_GT86_right.stl | 103.4KB | |
Fusia.ai | 45.2KB | |
GT86_Pioneer_Fusia_V3.stl | 17.3KB | |
side.ai | 1.4MB |