Basically i just did a bunch of pulleys in STL format that i could not get hold of in my country. I decided to make and tweak them for the purpose of being used in the Root 2 & Bertha 3.0 CNC machines
each file does have the intended name and bore sizing ( i chose 5mm instead of 6.35 as the shafts available to me are 5 & 8mm (which i think is more common anyways)).
also the "x*" in the name is the number of copies required of each part , i did these for my own purposes , but if it helps, then by all means enjoy...otherwise feel free to obviously print as many as you'd like to suit your project's needs :P !?
PS, excuse the file size, i just made sure that they were of a higher quality due to the specifics of useage for the pulleys i felt it was best to try achieve the highest possible accuracy.
Thanks and enjoy
SamCV
| GT2_20T_-_5mm_Bore_x3_-_STL_V1.STL | 14.5MB | |
| GT2_20T_-_8mm_Bore_x1_-_STLV1.STL | 14.9MB | |
| GT2_T36_8mm_Bore_x2_-_STL_V1.STL | 20.8MB | |
| PART_08_-_GT2_PULLEY_40T_8_MM_BORE_x2.stl | 328.1KB |
