Grow Light Support For IKEA OMAR Shelves 3D Printer Model Free Download

Description Files (8)

Summary

This is a functionnal system to support grow lights on my IKEA OMAR shelves, made to fit Feit Electric grow lights. It looks better, and is much more stable, than using zipties.

The whole setup is perfect for starting seeds indoor before gardening season, as well as growing microgreens, and indoor vegetables, lettuce and herbs using the kratky method.

Everything is snap fit and has been printed, tested, and used.

The Light Joint is meant to join two double LEDs lights (see product pictured) to get a quad setup.
The Light Side Bracket is meant to hold the sides of that quad setup / Or alternatively, you could use it to fully support one light if desired.
Use the Clips to suspend those joints/brackets to the shelves.
Use Spacers if you also are using a metal OMAR shelf liner
Use the Side Hook if you want to suspend a light on the side of the OMAR unit
The Cable Hooks make for a neat way to secure the light cables around the shelves. Long version for the long side of the shelf, Short version for the short side of the shelf. (The V2 for the short cable hook is a bit longer, to accomodate for the slight variation in the making of the shelve unit, I prefer this version)

For a single Feit LED quad setup from two dual LEDs, you will need to print the following:

Feit_Light_Joint x2
Feit_Light_Side_Bracket x4
OMAR_Clip x6
OMAR_Spacer x9 (if using a shelf liner only)

Feit_Light_Joint.stl	58.2KB
Feit_Light_Side_Bracket.stl	51.8KB
OMAR_Cable_Hook_Long.stl	78.3KB
OMAR_Cable_Hook_Short.stl	78.1KB
OMAR_Cable_Hook_ShortV2.stl	77.6KB
OMAR_Clip.stl	71.7KB
OMAR_Side_Feit_Hook.stl	93.1KB
OMAR_Spacer.stl	54.0KB

Grow Light Support For IKEA OMAR Shelves 3D Printer Model

Summary

Tags

You might also like