Grow Lamp For Indoor Garden 3D Printer Model
The file 'Grow Lamp For Indoor Garden 3D Printer Model' is (stl) file type, size is 244.1KB.
The file 'Grow Lamp For Indoor Garden 3D Printer Model' is (stl) file type, size is 244.1KB.
A LED grow lamp for indoor gardening, supplements natural light after the sunset, before the dawn and on cloudy days. Fits Ikea's LACK coffee table
http://www.ikea.com/us/en/catalog/products/40104294/#/10104295
The lamp allows natural light through, can be adjusted to any height and is easily removed when watering the plants.
Materials used:
16 feet grow light LED strip and power supply
6 3'x0.5''x0.125'' aluminum flats
https://www.lowes.ca/metal-products/the-hillman-group-113-aluminum-flat-bar_g1199940.html
1 4'x0.5"x0.5" aluminum trim channel
https://www.lowes.ca/metal-products/the-hillman-group-113-aluminum-trim-channel_g1185899.html
4 5/16 3' threaded rods and 16 nuts
2 M2 12mm bolts and nuts
12 4-40 x 1/2' bolts and nuts
4 6-32 x 1' bolts and nuts
20 awg wire
heat shrink tubing
foam tape to insure snag fit of the parts on the table legs
acrylic paint for 3d printed parts - optional
The total cost of materials was around $75.
Tools needed:
drill, handsaw for drilling and cutting aluminum
soldering iron and solder
| Bottom1.stl | 101.0KB | |
| Bottom2.stl | 101.0KB | |
| BottomSupport1.stl | 20.3KB | |
| BottomSupport2.stl | 20.3KB | |
| ChannelEnd.stl | 1.4KB | |
| CordHolder1.stl | 51.3KB | |
| CordHolder2.stl | 360.8KB | |
| Top1.stl | 50.7KB | |
| Top2.stl | 50.7KB | |
| Top3.stl | 50.7KB | |
| Top4.stl | 50.7KB | |
| WireHolder.stl | 2.4KB |
