I've made a great cannon heavily inspired by the two cannons residing in Gripsholm castle in Sweden. Old russian spoils of war, they were built to look like wolves but the swedes lovingly call them "Galten" & "Suggan" meaning the Barrow and the Sow.
The models are fairly small for some reason, but a simple resize should do it.
I'd suggest making it roughly 800% size or make the main barrel about 110mm long and scale everything accordingly.
That should make it roughly the correct scale for 28mm miniatures. (Is big gun.)
NOTE!<
The last statement is false, i have no idea how i measured, but this is bigger than it should be. Perhaps 700% is closer. Make sure to measure.
I have included 3 different barrels, one plain, one like the original with the wolves head and an additional one of a cockatrice since i wanted it.
You can choose one or print all and swap between them. I tried to make the slots slightly bigger than the pegs but i cannot promise it will work.
To assemble a cannon you'll need.
1 Great cannon barrel
1 Great cannon mouth / wolf_pig / cockatrice
1 Great cannon supportback
1 Great cannon support main
1 Great cannon support pipe_mid
1 Great cannon rear wolf decoration (optional)
1 Great cannon peg (optional)
2 Great cannon clamp
2 Great cannon wheel
On popular demand, i could probably make a fully assembled model and upload it.
| Great_cannon_arm.stl | 662.7KB | |
| Great_cannon_barrel.stl | 1.8MB | |
| Great_cannon_clamp.stl | 30.0KB | |
| Great_cannon_mouth.stl | 316.5KB | |
| Great_cannon_mouth_cockatrice.stl | 405.2KB | |
| Great_cannon_mouth_wolf_pig.stl | 426.4KB | |
| Great_cannon_peg.stl | 2.0KB | |
| Great_cannon_rear_wolf_decoration.stl | 122.6KB | |
| Great_cannon_supportback.stl | 40.1KB | |
| Great_cannon_support_main.stl | 69.8KB | |
| Great_cannon_support_pipe_mid.stl | 40.1KB | |
| Great_cannon_wheel.stl | 336.5KB |
