Gridfinity Threading Die Holder, 1-1.5″ 3D Printer Model
The file 'Gridfinity Threading Die Holder, 1-1.5″ 3D Printer Model' is (step,stl) file type, size is 852.9KB.
The file 'Gridfinity Threading Die Holder, 1-1.5″ 3D Printer Model' is (step,stl) file type, size is 852.9KB.
Gridfinity compatible storage for round/hex threading dies up to 1.5" OD, with a label slot for a 34x12mm label, such as Brother/Dymo's 1/2" labels. Labels slide in, no adhesive necessary, but won't accidentally slide out.
There are 3 styles, all just shy of 57mm tall:
GF.Threading die holder 1-1.5in.21MM.stl: 42mm wide, but 21mm long. Holds a single 1-1.5" die, uses half of a Gridfinity square each. Great if you have a bunch of single dies of different sizes and don't want to waste space. If you have an odd number, print a spare or a spacer.
GF.Threading die holder 1-1.5in.42MM+21MM.stl: Fits in a regular 1x1 Gridfinity slot, but the base is a 2x2 of 21mm wide Gridfinity squares, so it snaps into place on half-tile increments as well. Using this one allows for easy mix-and-match with the 21mm long version. Holds up to three 1.5" dies or four 1" dies.
GF.Threading die holder 1-1.5in.42MM.stl: Holds up to three 1.5" dies or four 1" dies, same as above, but with a regular base.
Note: Make labels 1.3" long if your label maker is set to use inches.
| GF.Threading_die_holder_1-1.5in.21MM.step | 369.4KB | |
| GF.Threading_die_holder_1-1.5in.21MM.stl | 725.9KB | |
| GF.Threading_die_holder_1-1.5in.42MM+21MM.step | 427.6KB | |
| GF.Threading_die_holder_1-1.5in.42MM+21MM.stl | 798.9KB | |
| GF.Threading_die_holder_1-1.5in.42MM.step | 339.5KB | |
| GF.Threading_die_holder_1-1.5in.42MM.stl | 738.0KB |
