Gridfinity Scalpel Box 3D Printer Model
The file 'Gridfinity Scalpel Box 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Gridfinity Scalpel Box 3D Printer Model' is (stl) file type, size is 1.2MB.
This is my attempt at a #gridfinity storage solution for a scalpel.
The scalpel ist stored in a 1x4x2 tray.
The lower box includes storage for a whole lot of replacement blades and a box to safely store used ones.
Combined with the tray it forms a 1x5x6 gridfinity element.
The lid for the sharps box is screwed on using 2 m3x10 flathead screws that allign with the magnet positions.
You will also need 2 m3 hex nuts.
The overhang on the fresh blades storage will need supports, everything else should print fine without them.
Why combine storage for fresh and used blades in such a whacky block shape?
The idea behind this is that you can carry everything you need to use the scalpel as one unit, but still keep the scalpel tray itself a seperate piece.
| box.stl | 3.1MB | |
| lid.stl | 200.6KB | |
| tray.stl | 1.7MB |
