Gridfinity Modified 1×1 3D Printer Model
The file 'Gridfinity Modified 1×1 3D Printer Model' is (stl,stp) file type, size is 4.6MB.
The file 'Gridfinity Modified 1×1 3D Printer Model' is (stl,stp) file type, size is 4.6MB.
Gridfinity Modified 1x1
Based on the Gridfinity System from Zack Freedman
https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
Licence:
CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/
Lizenz:
CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/deed.de
Änderungen/Changes: Ich benötige andere Maße und habe deshalb die Höhenangaben in 5mm Schritte geändert.
I need other dimensions and changed the height in 5mm steps. Den Absatz, ca. 3mm von oben, auf der Innenseite, habe ich entfernt.
I removed the inner step, 3mm from the top.
Maße/Dimensions:
1x1x15 = Die ersten beiden Zahlen sind gleich wie im bisherigen System, die dritte Zahl ist die Gesamthöhe in mm
1x1x15 = The first two numbers are the same as in the original system, the third number is the total height in mm.
.stp & .stl Dateien
| Gridfinity-1x1x15.stl | 4.3MB | |
| Gridfinity-1x1x15.stp | 78.8KB | |
| Gridfinity-1x1x20.stl | 4.3MB | |
| Gridfinity-1x1x20.stp | 78.8KB | |
| Gridfinity-1x1x25.stl | 4.3MB | |
| Gridfinity-1x1x25.stp | 78.8KB | |
| Gridfinity-1x1x30.stl | 4.3MB | |
| Gridfinity-1x1x30.stp | 78.8KB | |
| Gridfinity-1x1x35.stl | 4.3MB | |
| Gridfinity-1x1x35.stp | 78.8KB | |
| Gridfinity-1x1x40.stl | 4.3MB | |
| Gridfinity-1x1x40.stp | 78.8KB | |
| Gridfinity-1x1x45.stl | 4.3MB | |
| Gridfinity-1x1x45.stp | 78.8KB | |
| Gridfinity-1x1x50.stl | 4.3MB | |
| Gridfinity-1x1x50.stp | 78.8KB | |
| Gridfinity-1x1x55.stl | 4.3MB | |
| Gridfinity-1x1x55.stp | 78.8KB | |
| Gridfinity-1x1x60.stl | 4.3MB | |
| Gridfinity-1x1x60.stp | 78.8KB | |
| Gridfinity-1x1x65.stl | 4.3MB | |
| Gridfinity-1x1x65.stp | 78.8KB | |
| Gridfinity-1x1x70.stl | 4.3MB | |
| Gridfinity-1x1x70.stp | 78.8KB | |
| Gridfinity-1x1x75.stl | 4.3MB | |
| Gridfinity-1x1x75.stp | 78.8KB |
