A set of M3 fastener bins based on the Gridfinity standard. The main idea of Gridfinity is that you only remove what you need from storage for a project.
I've modified the magnet holes to remove the fastener and only take magnets. I found gluing the magnets to be a pain with the second blind hole.
split the model to parts in your slicer for
Hope you enjoy, thanks to Zack Freedman and Gridfinity
| 1x1_M3_Heat.stl | 1.1MB | |
| 1x1_M3_Nylock.stl | 1.1MB | |
| 1x1_M3_Square.stl | 1.1MB | |
| 1x1_M3_Washer.stl | 1.1MB | |
| 1x1_M3_x_10.stl | 1.0MB | |
| 1x1_M3_x_12.stl | 1.0MB | |
| 1x1_M3_x_14.stl | 1020.1KB | |
| 1x1_M3_x_16.stl | 1.0MB | |
| 1x1_M3_x_18.stl | 1.0MB | |
| 1x1_M3_x_20.stl | 1.0MB | |
| 1x1_M3_x_22.stl | 1.0MB | |
| 1x1_M3_x_25.stl | 1.0MB | |
| 1x1_M3_x_30.stl | 1.1MB | |
| 1x1_M3_x_6.stl | 1.0MB | |
| 1x1_M3_x_8.stl | 1.0MB | |
| 1x1_No_Label.stl | 638.9KB | |
| BasePlate_4x4.stl | 2.3MB |
