Gridfinity LTT Screwdriver Bit Bin 3D Printer Model
The file 'Gridfinity LTT Screwdriver Bit Bin 3D Printer Model' is (step,stl) file type, size is 24.9MB.
The file 'Gridfinity LTT Screwdriver Bit Bin 3D Printer Model' is (step,stl) file type, size is 24.9MB.
2x3 Gridfinity bin to hold all the LTT bits.
The bits are recessed into the bin so that another bin can stack on top without colliding with bits in the case. Additional files are provided to allow an extra 2mm depth in the bit slot if you want to glue the 6x2 magnets in the bottom of each slot to retain the bits.
There are 3 versions of the text. Text is raised from surface 0.5mm.
Revision History
07/03/2024 - updated the files with correct dimensions for the bits.
| LTT_Bit_Holder_5U_-_LTT_names.step | 9.9MB | |
| LTT_Bit_Holder_5U_-_LTT_names.stl | 6.6MB | |
| LTT_Bit_Holder_5U_-_LTT_names_-_2mm_magnet_offset.step | 9.9MB | |
| LTT_Bit_Holder_5U_-_LTT_names_-_2mm_magnet_offset.stl | 6.6MB | |
| LTT_Bit_Holder_5U_-_no_names.step | 914.0KB | |
| LTT_Bit_Holder_5U_-_no_names.stl | 1.3MB | |
| LTT_Bit_Holder_5U_-_no_names_-_2mm_magnet_offset.step | 914.0KB | |
| LTT_Bit_Holder_5U_-_no_names_-_2mm_magnet_offset.stl | 1.3MB | |
| LTT_Bit_Holder_5U_-_real_names.step | 10.2MB | |
| LTT_Bit_Holder_5U_-_real_names.stl | 6.8MB | |
| LTT_Bit_Holder_5U_-_real_names_-_2mm_magnet_offset.step | 10.2MB | |
| LTT_Bit_Holder_5U_-_real_names_-_2mm_magnet_offset.stl | 6.8MB | |
| LTT_Bit_Holder_6U_-_LTT_names.step | 9.9MB | |
| LTT_Bit_Holder_6U_-_LTT_names.stl | 6.6MB | |
| LTT_Bit_Holder_6U_-_LTT_names_-_2mm_magnet_offset.step | 9.9MB | |
| LTT_Bit_Holder_6U_-_LTT_names_-_2mm_magnet_offset.stl | 6.6MB | |
| LTT_Bit_Holder_6U_-_no_names.step | 912.5KB | |
| LTT_Bit_Holder_6U_-_no_names.stl | 1.3MB | |
| LTT_Bit_Holder_6U_-_no_names_-_2mm_magnet_offset.step | 912.5KB | |
| LTT_Bit_Holder_6U_-_no_names_-_2mm_magnet_offset.stl | 1.3MB | |
| LTT_Bit_Holder_6U_-_real_names.step | 10.2MB | |
| LTT_Bit_Holder_6U_-_real_names.stl | 6.8MB | |
| LTT_Bit_Holder_6U_-_real_names_-_2mm_magnet_offset.step | 10.2MB | |
| LTT_Bit_Holder_6U_-_real_names_-_2mm_magnet_offset.stl | 6.8MB |
