This is our first winter with our small green house. At night, the temperature will go down to the outside temperature (We haven't added heat yet). But during a sunny day, it can be 120F inside! Even when it is only 10F outside. As we are getting ready to start our seeds, I built a temp/pressure/humidity/Lux sensor to log the Greenhouse climate. We have manual ceiling vents, but we decide to add an automated gable fan and a fresh air vent. Since most small vents are for exhausting air, I designed / 3D printed an input louver vent.
For parts used check out: https://www.prusaprinters.org/prints/58276-greenhouse-louver-vent
| flatventblade.stl | 2.1MB | |
| greenhousevent.stl | 3.0MB | |
| ventscreen.stl | 5.9MB |
