Greenhouse-Dome (clickable) / Treibhausdom 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:46.4KB

The file 'Greenhouse-Dome (clickable) / Treibhausdom 3D Printer Model' is (stl) file type, size is 46.4KB.

Summary

Greenhouse-Dome (clickable)
(Treibhausdom für Kräuter und Pflanzen - zusammensteckbar)

Your seed, seedlings and plants also need a warm environment?

Based on the two Mini-dome parts hexa and penta from obijuan, i made a Greenhouse-Dome and other parts. With the parts here you can build a full (small) greenhouse-dome! All you need is a piece of PVC foil and a 3D printer. Even the connecting pieces can be printed if desired (or simply use wooden sticks). And the whole Greenhouse-Dome can be plugged together!

New parts allow now a Greenhouse-Dome with any height!

For my greenhouse as in the picture above (the small white-green dome), you need the following parts + a pvc-foil:

20x hexa (P-01)
6x penta (P-02)
40x A-Connector (P-03) or use 8 cm pvc-sticks
55x B-Connector (P-04) or use 9 cm pvc-sticks
10x hexa_V-Teil_fuer_Folie_V2 (P-30)
7x Folienklemme_schraeg_V2 (P-32)
3x Folienklemme_mit_Bodenanker_lang_schraeg_V2 (P-33) as ground anchor
+NEW: 10x Folienklemme (P-40)

Diameter: ca. 27-32 cm
Height: ca. 26 cm

Note: The big white dom in the fotos uses some of the new parts (see below the update from 22.05.2016).

You can find here also many other parts to download. For example, parts for a lower Greenhouse-Dome (3 level instead of 4-level high). Or a Dome-structure without foil. Or a garden house with individual height.

How the whole Dome is put together, you can see here (2V/L2 Icosahedron Dome). You'll find there also a Calculator for own stick length, if you want to build domes with different diameter.:
https://simplydifferently.org/Geodesic_Dome_Notes?page=3#2V/L2

Advice: I noticed that the woodensticks can become moldy by the humid climate. I therefore recommend to print the connections. And remember airing from time to time. Or look for some air circulation at the bottom of the dome.

Update:

28.05.2016: Added a few new pictures. More information on the new large dome which I made, here: http://www.thingiverse.com/make:224557

22.05.2016: 6 new pieces published (P-50, P-51, P-52, P-55, P-56 and P-57). These allow a Greenhouse-Dome with any height. According to the concept of my Flexible Mini Greenhouse-Dome with Pot: http://www.thingiverse.com/thing:1512115

18.05.2016: Improved connectors (P-03 and P-04) uploaded. They fit better and are slightly thicker in diameter. Therefore more stable. The deformation caused by the sun is also reduced.

13.04.2016: I added a new clickpart P-40.

Note: Looking for a small Greenhouse-Dome with Plant-Pot? Check out my newest greenhouse: http://www.thingiverse.com/thing:1512115

Let your plants grow! Enjoy!

Gardendome_P-01_hexa.stl 42.3KB
Gardendome_P-02_penta.stl 43.7KB
Gardendome_P-03_Verbindungsstab_Typ_A_spitz_8cm_NEW.stl 2.2KB
Gardendome_P-04_Verbindungsstab_Typ_B_spitz_9cm_NEW.stl 2.2KB
Gardendome_P-05_hexa_V-Teil_unten_geschlossen_lang_gerade.stl 7.7KB
Gardendome_P-06_hexa_V-Teil_unten_geschlossen_kurz_gerade.stl 7.7KB
Gardendome_P-07_hexa_V-Teil_unten_geschlossen_kurz_schraeg.stl 7.7KB
Gardendome_P-20_hexa_V-Teil_fuer_Folie_alt.stl 8.3KB
Gardendome_P-21_Folienklemme_gerade_alt.stl 2.0KB
Gardendome_P-22_Folienklemme_schraeg_alt.stl 2.0KB
Gardendome_P-23_Folienklemme_mit_Bodenanker_lang_schraeg_alt.stl 12.8KB
Gardendome_P-30_hexa_V-Teil_fuer_Folie_V2_NEU.stl 9.5KB
Gardendome_P-31_Folienklemme_gerade_V2_NEU.stl 11.8KB
Gardendome_P-32_Folienklemme_schraeg_V2_NEU.stl 14.8KB
Gardendome_P-33_Folienklemme_mit_Bodenanker_lang_schraeg_V2_NEU.stl 22.6KB
Gardendome_P-34_Folienklemme_mit_Bodenanker_lang_gerade_V2_NEU.stl 25.2KB
Gardendome_P-40_Folienklemme.stl 27.7KB
Gardendome_P-50_hexa-Y.stl 10.7KB
Gardendome_P-51_T-End-for-foil.stl 10.0KB
Gardendome_P-52_Folienklammer_flach.stl 16.1KB
Gardendome_P-55_Quer-Verbinder.stl 6.9KB
Gardendome_P-56_Verbinder.stl 3.4KB
Gardendome_P-57_Verbindungsstab_Typ_E_17cm_etwas_dicker.stl 2.2KB