Solid version of this planter to have more flexibility in printing
Printing:
I printed at 0.24 height 0.48 width and some overhangs caused gaps, so the advice is to use less layer height or variable layer height
3 walls, 0 top layers and 0% Infill
Vase/Spiralized mode, not really recommended unless you scale down, or use a really wide nozzle at low layer height, because of the steep overhangs
If it turns out watertight, make some drain holes at the bottom, mine turned out porous, so not needed as it leaks the water out
default size fits an ender3 on Prusaslicer
Original model by https://www.thingiverse.com/WalkerPC
| Grecian_Style_Greek_Key_and_Grapes_Planter_v1.stl | 11.2MB |
