Great Western Trail + RttN Expansion (2nd Editions) Various Inserts 3D Printer Model
The file 'Great Western Trail + RttN Expansion (2nd Editions) Various Inserts 3D Printer Model' is (stl) file type, size is 692.2KB.
The file 'Great Western Trail + RttN Expansion (2nd Editions) Various Inserts 3D Printer Model' is (stl) file type, size is 692.2KB.
Various board game inserts/organizers for the 2nd edition of Great Western Trail (includes the Rails to the North Expansion components also, e.g. 13th building tile + branchlets and more). See the photos of all parts in the box layer-by-layer in the Thing Details*** section (scroll down!). There is dead space so some movement can occur when transporting. Also, I had some minimal lid lift.
I think the most valuable designs here are the Player Boxes + Lids and the Card Storage + Lids. The others are nice to have but not critical; it depends on how much you want to print!
Summary of components:
GWT Player Box (print 1x for each color, all 4 are the same); Herder/Hat/Train Engine go in middle side pocket; branchlets in larger middle pocket (see photos)
GWT Player Box Lid (print 1x OF each color, all 4 are unique files)
GWT Coin Storage V1 (print 1x or use V2)
GWT Coin Storage V1 Lid (print 1x or use V2)
GWT Coin Storage V2 (print 1x or use V1)
GWT Coin Storage V2 Lid (print 1x or use V1)
V1 vs. V2: V1 is simpler and faster to print (Lid doesn't work the best); V2 is a longer print/larger part. I would advise starting with V1 (they both have their pros/cons).
GWT Exchange and Job Market Tokens Storage (print 1x)
GWT Exchange and Job Market Tokens Storage Lid (print 1x)
GWT Neutral Building Tiles and Player Count Tiles Box (print 1x)
Note: basic box to hold the pieces upright; nothing fancy here/no lid
GWT Station Master and Town Tiles Storage (print 1x)
GWT Station Master and Town Tiles Storage Lid (print 1x)
Note: Station Master tiles go in the bottom first, then Town tiles
GWT Tile Storage (print 3x for each set, all 3 are the same)
GWT Tile Storage Lid (print 3x)
GWT Building Riser (used to raise the building tiles for better visibility; print 7x in gray for Neutral Building tiles and 22x in beige for all player building tiles; this covers all spots on the board)
GWT Riser Storage (print 5x for all 29 risers; no lid made for this)
GWT Card Storage (print 3x; 3 unique lids below for various card types)
GWT Player Cattle Cards Lid (print 1x)
GWT Market Cattle Cards Lid (print 1x)
GWT Objective_Solo Cards Lid (print 1x)
| GWT_Building_Riser.stl | 87.0KB | |
| GWT_Card_Storage.stl | 9.3KB | |
| GWT_Coin_Storage_V1.stl | 83.5KB | |
| GWT_Coin_Storage_V1_Lid.stl | 1.4KB | |
| GWT_Coin_Storage_V2.stl | 158.3KB | |
| GWT_Coin_Storage_V2_Lid.stl | 152.6KB | |
| GWT_Exchange_Job_Market_Tokens_Storage.stl | 30.7KB | |
| GWT_Exchange_Job_Mkt_Tokens_Lid.stl | 1.4KB | |
| GWT_Market_Cattle_Cards_Lid.stl | 607.4KB | |
| GWT_Neut._Building_Tiles_and_Player_Ct_Tiles_Box.stl | 2.2KB | |
| GWT_Objective_Solo_Cards_Lid.stl | 803.4KB | |
| GWT_Player_Box.stl | 67.7KB | |
| GWT_Player_Box_Lid_Blue.stl | 144.8KB | |
| GWT_Player_Box_Lid_Red.stl | 141.9KB | |
| GWT_Player_Box_Lid_White.stl | 148.8KB | |
| GWT_Player_Box_Lid_Yellow.stl | 128.2KB | |
| GWT_Player_Cattle_Cards_Lid.stl | 629.4KB | |
| GWT_Riser_Storage.stl | 7.7KB | |
| GWT_Station_Master_and_Town_Tiles_Lid.stl | 1.4KB | |
| GWT_Station_Master_and_Town_Tiles_Storage.stl | 3.8KB | |
| GWT_Tile_Storage_1-3.stl | 9.7KB | |
| GWT_Tile_Storage_Lid_1-3.stl | 1.4KB |
