Wanted to print the original file for a buddy but it was too large for my Ender 3 and I didn't like the dice mechanism. I scaled to 77%, removed the original interior and added my own. It's just 2 simple shelves with a funnel at the top, pretty standard for a dice tower. I also combined the dice tray with the tower so they print in one piece. I sized it for standard DnD dice but haven't fully tested it yet. I am currently printing at 110% of my file which would put it at roughly 84% of the original.
The file needs a ton of supports. I'd recommend adding blockers to the interior so you don't have to mess with supports in there. It should print fine.
| greyscull_77pct_remodel.STL | 27.2MB |
