This is my take on a simplistic gravity knife
There is no hardware needed
It works straight from the printbed
I have only printed it using PETG-CF because that is what I usually print with
Please tell me if something doesn't work so that i can fix it
Instructions:
I use 3 walls when printing
Only the blade needs support, I just use tree support in the hole and the cut out
I also made sure the seam is on the other side of the hole in the Shell part
| Base.stl | 132.9KB | |
| Blade.stl | 18.0KB | |
| Pin.stl | 349.1KB | |
| Shell.stl | 206.3KB | |
| Slider.stl | 324.5KB |
