Gravitrax Riser Assemblies- Compatable With Spacerail Parts (not Required) 3D Printer Model
The file 'Gravitrax Riser Assemblies- Compatable With Spacerail Parts (not Required) 3D Printer Model' is (stl,3mf) file type, size is 1001.5KB.
The file 'Gravitrax Riser Assemblies- Compatable With Spacerail Parts (not Required) 3D Printer Model' is (stl,3mf) file type, size is 1001.5KB.
This started out as wanting to be able to use the aluminum shafts from the SpaceRail Kit we have in the basement for risers in my gravitrax set. To this end, my base and top works very well (pictured above) so if you have a Spacerail set laying around, this will work for you. Then I decided to make some pegs, because the aluminum shafts were too long for most practical applications. Then I realized I was essentially redesigning the wheel that Alex80it already made, except for the SpaceRail aspect. Anyway, for what it is worth, this is a simple to print system that can be used to make risers quickly that don't take up a lot of storage space. So similar was the core design to Alex80it, that I decided to create a small adapter that would link my pegs to his bases, so there you go. It is included with this bunch of files. I should make note here that these are surprisingly sturdy and stable. They all should be measured to standard spacer heights. I hope you enjoy them.
NOTE: The long end of the peg goes in the base. the short end goes in the top. there will be a small gap between the end of the peg triangle section and the base/top plates.
| AdapterForAlex80itBases.stl | 27.6KB | |
| CE3PRO_PillarAdaptersPeg.3mf | 803.4KB | |
| PillarAdaptersBottom.stl | 1.2MB | |
| PillarAdaptersPeg.stl | 10.6KB | |
| PillarAdaptersPeg145.stl | 10.6KB | |
| PillarAdaptersPeg95.stl | 10.6KB | |
| PillarAdaptersPegLong.stl | 10.6KB | |
| PillarAdaptersPegMedium.stl | 10.6KB | |
| PillarAdaptersRingALittleTighter.stl | 124.0KB | |
| PillarAdaptersRingTighter.stl | 216.7KB | |
| PillarAdaptersTopB.stl | 354.2KB |
