Gravitrax Long Rail 3D Printer Model
The file 'Gravitrax Long Rail 3D Printer Model' is (stl) file type, size is 24.3KB.
The file 'Gravitrax Long Rail 3D Printer Model' is (stl) file type, size is 24.3KB.
With this small part, rails of any length can be made. Two of these parts and two brass or aluminium rods with 3 mm diameter are required.
Example: For a rail over 4 fields, two metal rods with a length of 228 mm are required (5 fields 288 mm).
Since the printer cannot print an accurate 3 mm hole, the holes may need to be re-drilled with a 3 mm drill.
| Schienenkopf_3mm.stl | 86.4KB |
