THE BOTTOM HEX CONNECTOR IS NOT MISSING read the print instructions below.
DISCLAIMER: I strongly recommend buying the original Gravitrax sets. I'm only making parts that extend the great original gameplay as they cannot be found in the original set. They either add a new possibility or simplify/change/complete an existing one.
Those tiles are not copies of the existing tiles from the great Gravitrax game, they are themed around the "infinity" 8 shapes. There might be ideal where you need to slow things down, thanks to the sharp angles, or some of them might just do what you were looking for in a more... twisted way. And of course, some are crazy. Pick whichever you like ;-)
This is part of a bigger (still growing) collection of tiles (https://www.thingiverse.com/thing:4538769)
The bottom hex connector is part of the stl. Once printed, you extract it, turn it 30°, and clip it. Add some glue if the binding is not tight enough to your taste.
IMPORTANT: I was very careful about the measurements... I recommend tuning your printer well before printing this. And to have a look at my print settings. Else you may encounter issues with the new fixation. I only wish you get the best experience!
| infinity-and-back.stl | 1.5MB | |
| infinity-and-bigbang.stl | 1.1MB | |
| infinity-and-lCurve-left.stl | 1.1MB | |
| infinity-and-lCurve-right.stl | 1.1MB | |
| infinity-and-light.stl | 1.0MB | |
| infinity-and-out.stl | 1.4MB | |
| infinity-and-sCurve-left-and-lCurve-left.stl | 1.3MB | |
| infinity-and-sCurve-left-and-lCurve-right.stl | 1.3MB | |
| infinity-and-sCurve-left.stl | 1.2MB | |
| infinity-and-sCurve-right-and-lCurve-left.stl | 1.3MB | |
| infinity-and-sCurve-right-and-lCurve-right.stl | 1.3MB | |
| infinity-and-sCurve-right.stl | 1.2MB |
