Grave Yard Fence With Articulated Gate 3D Printer Model
The file 'Grave Yard Fence With Articulated Gate 3D Printer Model' is (stl) file type, size is 41.6MB.
The file 'Grave Yard Fence With Articulated Gate 3D Printer Model' is (stl) file type, size is 41.6MB.
UPDATE: Added in corners and an articulated gate. 2 ways to print the gate, as a whole supportless, or with the gate on its own. The single gate by itself has little jam holes in the bottom of the hinge pin so you can wedge them on
Little fence to wall off your graveyard. The tops have a recess for 4x2mm magnets if you wanted to use them, otherwise it's also slotted and shouldn't need them if you don't want to.
EDIT:
Haha whoops, forgot to fix some loose faces. It won't hurt anything but the perfectionist in me just had to fix it. If you already downloaded the original files they'll be fine, but I added the repaired versions just cause
For the corner no fence one just print the same fences from the wall. Might be a tight fit but it's small enough it should flex into place no problem
| Corner.stl | 12.6MB | |
| Corner_no_fence.stl | 8.1MB | |
| Fence_in_Pieces_REPAIRED.stl | 3.1MB | |
| Full_Gate.stl | 24.4MB | |
| Gate_Frame.stl | 17.4MB | |
| Gate_with_jam_holes.stl | 6.7MB | |
| Merged_complete_REPAIRED.stl | 6.7MB | |
| topper_REPAIRED.stl | 1.0MB | |
| Wall_Section_no_fence_REPAIRED.stl | 4.0MB |
