Grass Reinforcement Mesh (tested With Landroid) 3D Printer Model
The file 'Grass Reinforcement Mesh (tested With Landroid) 3D Printer Model' is (stl) file type, size is 851.3KB.
The file 'Grass Reinforcement Mesh (tested With Landroid) 3D Printer Model' is (stl) file type, size is 851.3KB.
Update: I have added a printable peg for those who don't have a fitting one already.
This Honeycomb Mesh Reinforcement part is created to reinforce the lawn in the places where a robotic lawn Mower is stuck or dicking it self down.
The Mesh is made to fit the standard pegs for the edge wire as shown in the pictures.
After a while, the net will not be visible anymore as the grass has grown tall.
This mesh has been tested with Worx Landroid s500 and fits the wheel size for a good grip.
It is a rather large Mesh and takes almost the entire print bed of an Ender 3 Pro.
Dimentions:
206.047 mm x 171.918 mm x 8.000 mm
| Big_Honycomb_mesh_for_grass_reinforcement.stl | 1.7MB | |
| Landroid_Peg.stl | 497.6KB |
![[ROUND] QiCharger ( Anker PowerWave ) For Galaxy S9 3D Printer Model](https://cdn.3axis.co/assets/d5/5d/92/7a/d55d927a-09c1-4870-b6c2-a447e3ed4806/images/0e949ef7-00a0-4350-a6e1-f75a137e9e74_thumb.jpg)
