Wanted to support my card so i made one of those thingy.
Stand.stl and Rod.stl are 128.25mm when threaded all the way, expands to approximately to 210mm.
Print the test pieces first to check the thread tolerances of your printer
The taller versions added an extra 20mm for the old PC cases without PSU shrouds
| Rod.stl | 10.5MB | |
| Rod_taller.stl | 16.5MB | |
| rod_test.stl | 2.7MB | |
| shaft_test.stl | 309.7KB | |
| Stand.stl | 3.0MB | |
| Stand_taller.stl | 3.0MB |
