GPU Vertical Mount – SLI 3D Printer Model
The file 'GPU Vertical Mount – SLI 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'GPU Vertical Mount – SLI 3D Printer Model' is (stl) file type, size is 1.4MB.
Backplate 9 has been updated to match.
A vertical GPU mount for SLI. I designed this mount in from scratch, using an old case to get the dimensions for the PCI slots and the alignment of the riser cables. I actually designed this in December 2017. I searched on Thingiverse for something that was already made but there was nothing that met my needs. I designed this to be able to fit into most full tower cases. It needs to have at least 8 slots available in order to fit. GPU's are actually really tall!
The case I have is the Corsair 780T. I had to cut the case where the GPU sits once vertical in order to be able to connect the cables. I didn't realise that there are braces between each slot but it's definitely worth it. It will still work perfectly fine if I ever revert back to normal mounting.
I used some fasteners to assemble the mount which you will need to purchase. You don't have to use the exact some ones but I designed it to work with the following:
Machine Screws M4 Countersunk
-- 16mm x 5
-- 12mm x 12
-- 10mm x 2
Flat Washers M4 - Qty 19
Self Locking Nut M4 - Qty 19
Machine Screws M3 Pan head - 16mm - Qty 4
Flat Washer M3 - Qty 4
Self Locking Nut M3 - Qty 4
Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm:
https://www.amazon.com/Thermaltake-Gaming-Black-Extender-AC-053-CN1OTN-C1/dp/B06Y5YNGDJ
| PCI_Backplate_9.stl | 1.6MB | |
| PCI_Back_Angle_Brace_6.stl | 462.8KB | |
| PCI_Front_Angle_Brace_6.stl | 283.6KB | |
| PCI_Front_Angle_Brace_6_-_tonkatommy.stl | 429.2KB | |
| PCI_L_Bracket_7.stl | 474.1KB | |
| PCI_Port_Holder_8.stl | 1.1MB | |
| PCI_Slots_8.stl | 2.0MB | |
| PCI_Stand_9.stl | 138.0KB |
