GPrint Box 1.3 3D Printer Model
The file 'GPrint Box 1.3 3D Printer Model' is (stl,step) file type, size is 2.5MB.
The file 'GPrint Box 1.3 3D Printer Model' is (stl,step) file type, size is 2.5MB.
Gprint Box is an open source 3D printer that can be made in your
backyard with minimal tools and some printed hardware. With an all steel
frame this thing is a tank that can be taken into the remotest of regions.
The frame and build volume is scale able. As drawn it is 20.5 inches square and can be
collapsed into a 4 inch tall box. If you have any questions email me
[email protected]. If you don't have CAD software you can use this link:
https://cad.onshape.com/documents/79aabf820218461d02a0175e/w/3afa53a7a5026bea2050e45a/e/e1f5eaa7a9c206526647ba92
to see the whole thing
| 8mm_rod_End_Bracket_X3.stl | 126.7KB | |
| Extruder_Main_Body.stl | 943.5KB | |
| Extruder_Motor_Bracket.stl | 651.9KB | |
| Extruder_Tensioner.stl | 218.1KB | |
| Filament_guide.stl | 142.9KB | |
| Gromet.stl | 164.3KB | |
| Hot_End_Clamp.stl | 77.8KB | |
| Printer.step | 8.2MB | |
| Y_-Axis_Motor_Bracket.stl | 359.0KB | |
| Z_Axis_to_X_Gantry.stl | 474.4KB | |
| Z_Motor_bracket.stl | 267.3KB |
