GoW Lancer 3D Printer Model
The file 'GoW Lancer 3D Printer Model' is (stl) file type, size is 54.0MB.
The file 'GoW Lancer 3D Printer Model' is (stl) file type, size is 54.0MB.
This is my fixed and broken down version of the Gears of War lancer prop. All credit for the model goes to Edgar Monroy from My Mini Factory. https://www.myminifactory.com/object/3d-print-gears-of-war-lancer-chainsaw-gun-11478
**YOU WILL HAVE TO ORIENT THE PIECES PROPERLY IN YOUR SLICER. SOME PIECES SHOW HOLLOW AT ONE END. PUT THIS SIDE ON THE PRINT BED**
| Part_10_1.stl | 2.2MB | |
| Part_10_2.stl | 2.1MB | |
| Part_10_3.stl | 660.7KB | |
| Part_11_1.stl | 17.2MB | |
| Part_11_2.stl | 2.8MB | |
| Part_11_3.stl | 931.8KB | |
| Part_11_4.stl | 277.5KB | |
| Part_12_1.stl | 1015.9KB | |
| Part_12_2.stl | 962.8KB | |
| Part_1_1.stl | 9.3MB | |
| Part_1_2.stl | 2.6MB | |
| Part_2_1.stl | 5.3MB | |
| Part_2_2.stl | 5.5MB | |
| Part_3_1.stl | 1.5MB | |
| Part_3_2.stl | 1.7MB | |
| Part_4_1.stl | 6.4MB | |
| Part_4_2.stl | 2.8MB | |
| Part_5_1.stl | 4.0MB | |
| Part_5_2.stl | 3.8MB | |
| Part_5_3.stl | 844.9KB | |
| Part_6_1.stl | 7.5MB | |
| Part_6_2.stl | 3.7MB | |
| Part_7_1.stl | 3.1MB | |
| Part_7_2.stl | 3.9MB | |
| Part_8_1.stl | 1.2MB | |
| Part_8_2.stl | 1.3MB | |
| Part_9_1.stl | 7.0MB | |
| Part_9_2.stl | 3.8MB | |
| Part_9_3.stl | 2.2MB |
