Gorilla for Tevo Tarantula
v 1.1
- added some thickness to the grill's flap and adjust slightly the height.
- added a no holes version for your customisation!
Fan Grill:
- print the first layer slowly 10mm/s
- 3 perimeters=1.2
- 4 top/bottom layers
- 20% infill
- minimum layer time: 10s
Fan Duct :
This fan duct produces amazing 100mm-30mm/s overhangs as you can see on the picture
- No supports (just for the screw mounts if you want to add)
- 25% infill or less, 4 perimeters, 3 top/bottom layers
- You may need to cut your blower's left screw mount a bit (just use pliers)
- to install the tube pinch the tube and slide it in
- this is a tight fit, so be sure to file all the blogs inside the fan mount.
- To mount the fan on the duct insert the lower corner first and rotate
-> BLTOUCH Mount
Note: If you want more modifications for sensors, Import the design on thinkercad.com and combine a sensor mount yourself. There's plenty of them pre made on that site Sorry but I can't please everyone.
