Gopro & Xiaomi Yi Generic Strap-on Mount 3D Printer Model
The file 'Gopro & Xiaomi Yi Generic Strap-on Mount 3D Printer Model' is (STL) file type, size is 1.8MB.
The file 'Gopro & Xiaomi Yi Generic Strap-on Mount 3D Printer Model' is (STL) file type, size is 1.8MB.
I didn't want to have a clumsy HD-camera mount on my Armattan Morphite 180 so I designed a generic mount that straps onto the same strap as the battery. Flight (and crash) testing has shown that the mounts works very well. If the crash is hard enough the mount and/or camera will just release from the straps.
This mount should work very well for any multicopter with top mounted battery. An extra 10-15mm strap is used for the gopro/xiaomi camera.
I have made the two variants in two angles, 10 and 25 degrees.
Some velcro, neoprene or hot glue would work well to add friction and keep the Lxl-mount and battery in place.
EDIT: I've added a longer L-mount which can be mounted under the battery for lower CoG.
Shapeways S-mount (10 deg): https://www.shapeways.com/product/HLLJCQ84Z/
Shapeways S-mount (25 deg): https://www.shapeways.com/product/UFS7AWW6U/
Shapeways L-mount (10 deg): https://www.shapeways.com/product/KT8UJKZAX/
Shapeways L-mount (25 deg): https://www.shapeways.com/product/KYL5THVEL/
Shapeways XL-mount (10 deg): https://www.shapeways.com/product/DM3ULLMVW/
Shapeways XL-mount (25 deg): https://www.shapeways.com/product/XQGHCDW6R/
| gpStrapmount-L-10.STL | 722.2KB | |
| gpStrapmount-L-25.STL | 724.7KB | |
| gpStrapmount-Lxl-10.STL | 665.2KB | |
| gpStrapmount-Lxl-25.STL | 677.5KB | |
| gpStrapmount-S-10.STL | 841.8KB | |
| gpStrapmount-S-25.STL | 853.3KB |
