A GoPro connector for the handlebar of a bicycle.
The diameter of the handlebar and the length of the arm is customizable.
Three M4 screws (DIN 933, 2x16mm & 1x20mm) and self-locking nuts are needed for the handlebar connector.
Two M5 screws (DIN 933, 20mm & 50mm) and nuts are needed for the GoPro connectors.
I glued half of a bicycle patch in each of the handlebar connectors - to have a better grip on the handlebar (see photo).
The screw_handle needs a screw M5x50, an additional nut and some hot glue.
The case for the GoPro Hero 5 is this one.
| GoPro-Lenkrad-Halterung.scad | 10.0KB | |
| GoPro-Lenkrad-Halterung.stl | 11.4MB | |
| GoPro-Lenkrad-Halterung_-_connector_bot_32mm.stl | 260.9KB | |
| GoPro-Lenkrad-Halterung_-_connector_gopro.stl | 3.4MB | |
| GoPro-Lenkrad-Halterung_-_connector_top_32mm.stl | 706.1KB | |
| GoPro-Lenkrad-Halterung_-_extension_50mm.stl | 5.4MB | |
| GoPro-Lenkrad-Halterung_-_screw_handle.stl | 1.7MB |
![[PythonSCAD] Broomstick Thread To Gopro 3 Prong 3D Printer Model](https://cdn.3axis.co/assets/ae/9e/b1/fc/ae9eb1fc-2fd3-4b36-b079-67431bd3cced/images/cb887adc-c217-4f2c-b444-a8d192a4a615_thumb.jpg)
